Lasersafe Enclosure for DMi8

11533500

11533500 - Lasersafe Enclosure for DMi8

Lasersafe black microscope incubator for DMi8 to control the temperature in a large volume around the microscope.

The set consists of:

H201-ENCLOSURE-DMi8-LASERSAFE-115



  • The enclosure is lined with a laser resistant material

  • Automated laser safety switch on all openable parts

  • Dark environment for light sensitive applications

  • Download compatibility chart


H201-T-UNIT-BL


Temperature Unit that generates warm air to raise the temperature inside the enclosure.



  • Temperature range: from 3°C above ambient to 45°C

  • Temperature accuracy: 0.1°C

  • Sample or enclosure feedback operation

  • # 3 Temperature sensors: in the enclosure; in the gas chamber; inside the air heater

  • # 1 Flow rate sensor inside the air heater


OKO-TOUCH


User-friendly 4.3” touch screen interface of Okolab Controllers.



  • Turn Controllers on/off

  • Define set point values

  • Select sample or enclosure feedback mode

  • Set flow rates of gas controllers

  • Display all set points and measured parameters

  • Run self calibration procedures


Choose the gas mixer

Gas Flow Regulator with Vibration Free Humidifier.

The set consists of:

SFM-0.04-0.4



  • Single flow meter used to regulate premixed gas flow rate in the range 0.04~0.4 l/min.


HM-VF



  • Vibration free humidifier

  • Fits inside the enclosure

  • Humidification occurs without bubbling through a semi-permeable membrane

  • Re-filler without opening the enclosure and without perturbing the sample


Manual gas mixer with Air Pump and Vibration Free Humidifier.

The set consists of:

2GF-MIXER



  • Mixes Air and 100% CO2  by mean of floating ball flow meters

  • CO2 is regulable in the range 0-15%

  • Accuracy on CO2: 1% without feedback


HM-VF



  • Vibration free humidifier

  • Fits inside the enclosure

  • Humidification occurs without bubbling through a semi-permeable membrane

  • Re-filler without opening the enclosure and without perturbing the sample


OKO-AIR-PUMP-BL



  • Plug and play solution for air inlet

  • Compatible with Bold Line Digital Gas Controllers

  • Convenient alternative to 100% air tanks/compressed air sources

  • Air flow rate: 0.4 l /min


Digital CO2 Controller with Air Pump and Vibration Free Humidifier.

The set consists of:

CO2-UNIT-BL



  • Range: CO2 0-18%

  • Accuracy: CO2 ± 0.1%

  • Repeatability better than 0.1%

  • Sensor type: CO2:  NDIR – 10 year-life

  • Output flow rate: 0.0 – 1.0 L/min. Outlet Pressure: ambient

  • Combine with HM-ACTIVE of HM-VF for output gas humidity control


OKO-AIR-PUMP-BL



  • Plug and play solution for air inlet

  • Compatible with Bold Line Digital Gas Controllers

  • Convenient alternative to 100% air tanks/compressed air sources

  • Air flow rate: 0.4 l /min


HM-VF



  • Vibration free humidifier

  • Fits inside the enclosure

  • Humidification occurs without bubbling through a semi-permeable membrane

  • Re-filler without opening the enclosure and without perturbing the sample


Digital CO2-O2 Controller with Air Pump and Vibration Free Humidifier.

The set consists of

CO2-O2-UNIT-BL [0-10;1-18]



  • Range: CO2 0-10%; O2 1-18% (or Air)

  • Accuracy: CO2± 0.1% @ 5.0%; O2 ± 0.1% @ 5.0%

  • Repeatability: CO2 better than 0.1%; O2 better than 0.1%

  • Sensor type: CO2:  NDIR – 10 year-life; O2: Optical – 5 years lifetime

  • Output flow rate: 0.0 – 1.0 L/min. Outlet Pressure: ambient

  • Combine with HM-ACTIVE of HM-VF for output gas humidity control


OKO-AIR-PUMP-BL



  • Plug and play solution for air inlet

  • Compatible with Bold Line Digital Gas Controllers

  • Convenient alternative to 100% air tanks/compressed air sources

  • Air flow rate: 0.4 l /min


HM-VF



  • Vibration free humidifier

  • Fits inside the enclosure

  • Humidification occurs without bubbling through a semi-permeable membrane

  • Re-filler without opening the enclosure and without perturbing the sample


Choose the gas chamber

H201-LG



  • Gas Chamber for Leica Inverted Super-Z

  • Total weight on stage: 100 g with standard inserts

  • Total weight on stage: 120 g with Multiwell insert

  • Perfusion holes: 12 holes for 2.5mm O.D. tubings available for perfusion

  • It requires at least one specimen holder


GS35-M
H201-MW-HOLDER
GS35-M
H201-MW-HOLDER
The set consists of:

 

H201-KF-KOEHLER


Gas Chamber for stages with k-frame opening (160×110 mm)



  • Comes with Koehler Lid

  • Features up to 12 holes for inlet and outlet of perfusion tubings

  • It requires at least one specimen holder


GS35-M



  • 1×3″ chamber slide and 35mm petri dishes holder


H201-MW-HOLDER



  • Multiwell plates holder


H201-K-FRAME


Gas Chamber for stages with k-frame opening (160×110 mm)



  • Comes with Sliding Lid

  • Features up to 12 holes for inlet and outlet of perfusion tubings

  • It requires at least one specimen holder


H201-MINI


Gas Chamber fitting in stages with Multi Well Plate holder



  • Best quality / price option

  • Hosts one specimen holder at the time (no multi accommodation holders)

  • Features up to 12 holes for inlet and outlet of perfusion tubings

  • Requires at least one specimen holder


Configuration Summary
In progress