H303-T-H-CO2/O2[0-95]

T-H-CO2/O2[0-95] StageTop Controller set contains the temperature controller for BL3 electrically heated chambers, active humidity, CO2 (0-20%) and O2 (0-95%) controller, the user touch screen interface and the USB cable for LASX connection.

The temperature module allows to work in chamber or in specimen feedback mode and to continuously monitor room temperature. T range: 3°C above ambient – 60°C. Specimen Temperature accuracy: ± 0.1°C in specimen feedback mode, ± 0.3°C in chamber feedback mode, if room temperature remains within ± 1°C. Automatic self-calibration routines for the incubating chamber and for the objective heater.

It mixes digitally N2, O2 and CO2 by means of mass flow controllers. CO2 range: 0-20%; Oxygen range: 0-95%. Output flow rate can be regulated in the range: 0.2-0.4 l/min.

The Active Humidity Controllers employs a humidity sensor to control gas relative humidity. Operating thermal range: 25÷50°C. Humidity range depends on working temperature. At 37°C humidity can be regulated in the range 50 to 95%. Humidity Set-point Resolution: 1%. It features a temperature controlled tube to deliver the humidified gas to the incubating chamber.

Integrated into LASX 2.0.

NOT compatible with the CO2-H-IN-CHAMBER SENSOR