H303-T-H-CO2

T-H-CO2 StageTop Controller set contains the temperature controller for BL3 electrically heated chambers, active humidity, CO2 controller, air pump, the user touch screen interface and the USB cable for LASX connection.

The temperature module allows to work in chamber or in specimen feedback mode and to continuously monitor room temperature. T range: 3°C above ambient – 60°C. Specimen Temperature accuracy: ± 0.1°C in specimen feedback mode, ± 0.3°C in chamber feedback mode, if room temperature remains within ± 1°C. Automatic self-calibration routines for the incubating chamber and for the objective heater.

CO2 is digitally regulated in the range 0-20% and actively controlled by a drift-free Non Dispersive InfraRed (NDIR) dual wave length CO2 sensor (10 years lifetime, accuracy ± 0.1%) with built in air pump. Total output flow rate is variable in the range: 0.05 – 0.4 l/min. (Factory setting: 0.4 l/min.).

The Active Humidity Controllers employs a humidity sensor to control gas relative humidity. Operating thermal range: 25÷50°C. Humidity range depends on working temperature. At 37°C humidity can be regulated in the range 50 to 95%. Humidity Set-point Resolution: 1%. It features a temperature controlled tube to deliver the humidified gas to the incubating chamber.

Integrated into LASX 2.0.

Compatible with the CO2-H-IN-CHAMBER SENSOR for in chamber closed loop control on CO2 and Humidity.