H203-T-H-CO2-O2[0-21]

Okolab Cage Incubator employs a Temperature, CO2, and O2 Control Unit that ensures precise environmental conditions inside the enclosure.

The H203-T-H-CO2-O2[0-21] Cage Controller set includes a temperature controller, CO2 (0-20%) and O2 (0-21%) controller, air pump, built-in Vibration Free Humidifying Module, user touch screen interface, and USB cable for LASX connection.

Superior accuracy is guaranteed by the interplay of two ductless heaters, which provide smooth warm air recirculation, ensuring excellent temperature stability on the sample. The system includes a Vibration Free Humidifying Module, which employs a water-permeable membrane to humidify the gas without introducing vibrations.

Oxygen and CO2 concentrations are digitally controlled by mixing Air (from the Okolab air pump), N2, and CO2. CO2 is measured by a drift-free Non-Dispersive InfraRed (NDIR) dual-wavelength sensor, while O2 is measured by an Optical Oxygen sensor, both ensuring high accuracy and long-term stability. A dedicated air pump supplies background air, with a total output flow rate adjustable from 0.2 to 0.4 l/min (factory setting: 0.4 l/min).

Okolab Cage Incubation System supports both Enclosure (Chamber) Feedback mode and Sample Feedback mode as standard features. The end user can select the temperature sensor driving feedback to the controller.

  • Temperature range: from 3°C above ambient to 45°C
  • Temperature accuracy: ± 0.1°C on the sample
  • Two ductless heaters for smooth warm air recirculation
  • Vibration Free Humidifying Module employing a water-permeable membrane
  • CO2 sensor: NDIR dual-wavelength detector
  • Oxygen sensor: Optical Oxygen sensor
  • CO2 accuracy: ± 0.1%
  • CO2 range: 0-20%
  • CO2 sensor lifetime: 10 years
  • Oxygen accuracy: ± 0.1% at 5% O2
  • Oxygen range: 0-21%
  • Oxygen sensor lifetime: 5 years
  • Oxygen resolution: 0.1%
  • Air pump flow rate: 0.2 – 0.4 l/min, factory set at 0.4 l/min
  • Sample or enclosure feedback operation
  • Operated via touch screen interface OKO-TOUCH
  • Compatible with the CO2-H-IN-CHAMBER SENSOR for in-chamber closed-loop control of CO2, O2, and humidity
  • Integrated LASX 2.0
back
H203-T-H-CO2-O2[0-21]