Transparent Enclosure for DMi8
11533501
11533501 - Transparent Enclosure for DMi8
Transparent microscope incubator for DMi8 to control the temperature in a large volume around the microscope.
The set consists of:
The set consists of:
H201-ENCLOSURE-DMi8-115
- Compatible with all DMi8 configurations – download compatibility chart
- Front and cover panels can be removed easily and quickly by means of rotating hinges
- Sliding doors allow easy access to the microscope and sample
- Seals and sealed openings allow tubes and cables to be inserted inside the housing
- Dual air inlets and outlets and constant air circulation ensure stable operation of the system and excellent temperature distribution throughout the housing.
- Built in dimmable LED light.
H201-T-UNIT-BL
Temperature Unit that generates warm air to raise the temperature inside the enclosure.
- Temperature range: from 3°C above ambient to 42°C
- Temperature accuracy: 0.1°C
- Sample or enclosure feedback operation
- # 3 Temperature sensors: in the enclosure; in the gas chamber; inside the air heater
- # 1 Flow rate sensor inside the air heater
OKO-TOUCH
User-friendly 4.3” touch screen interface of Okolab Controllers.
- Turn Controllers on/off
- Define set point values
- Select sample or enclosure feedback mode
- Set flow rates of gas controllers
- Display all set points and measured parameters
- Run self calibration procedures
Choose the gas controller
Gas Flow Regulator with Vibration Free Humidifier.
The set consists of:
The set consists of:
SFM-0.04-0.4
- Single flow meter used to regulate premixed gas flow rate in the range 0.04~0.4 l/min.
HM-VF
- Vibration free humidifier
- Fits inside the enclosure
- Humidification occurs without bubbling through a semi-permeable membrane
- Re-filler without opening the enclosure and without perturbing the sample
Manual gas mixer with Air Pump and Vibration Free Humidifier.
The set consists of:
The set consists of:
2GF-MIXER
- Mixes Air and 100% CO2 by mean of floating ball flow meters
- CO2 is regulable in the range 0-15%
- Accuracy on CO2: 1% without feedback
HM-VF
- Vibration free humidifier
- Fits inside the enclosure
- Humidification occurs without bubbling through a semi-permeable membrane
- Re-filler without opening the enclosure and without perturbing the sample
OKO-AP
- Plug and play solution for air inlet
- Compatible with UNO line
- Convenient alternative to 100% air tanks/compressed air sources
- Air flow rate: 0.4 l /min
Digital CO2 Controller with Air Pump and Vibration Free Humidifier.
The set consists of:
The set consists of:
CO2-UNIT-BL
- Range: CO2 0-18%
- Accuracy: CO2 ± 0.1%
- Repeatability better than 0.1%
- Sensor type: CO2: NDIR – 10 year-life
- Output flow rate: 0.0 – 1.0 L/min. Outlet Pressure: ambient
- Combine with HM-ACTIVE of HM-VF for output gas humidity control
OKO-AIR-PUMP-BL
- Plug and play solution for air inlet
- Compatible with Bold Line Digital Gas Controllers
- Convenient alternative to 100% air tanks/compressed air sources
- Air flow rate: 0.4 l /min
HM-VF
- Vibration free humidifier
- Fits inside the enclosure
- Humidification occurs without bubbling through a semi-permeable membrane
- Re-filler without opening the enclosure and without perturbing the sample
Digital CO2-O2 Controller with Air Pump and Vibration Free Humidifier.
The set consists of
The set consists of
CO2-O2-UNIT-BL [0-10;1-18]
- Range: CO2 0-10%; O2 1-18% (or Air)
- Accuracy: CO2± 0.1% @ 5.0%; O2 ± 0.1% @ 5.0%
- Repeatability: CO2 better than 0.1%; O2 better than 0.1%
- Sensor type: CO2: NDIR – 10 year-life; O2: Optical – 5 years lifetime
- Output flow rate: 0.0 – 1.0 L/min. Outlet Pressure: ambient
- Combine with HM-ACTIVE of HM-VF for output gas humidity control
OKO-AIR-PUMP-BL
- Plug and play solution for air inlet
- Compatible with Bold Line Digital Gas Controllers
- Convenient alternative to 100% air tanks/compressed air sources
- Air flow rate: 0.4 l /min
HM-VF
- Vibration free humidifier
- Fits inside the enclosure
- Humidification occurs without bubbling through a semi-permeable membrane
- Re-filler without opening the enclosure and without perturbing the sample
Choose the gas chamber
H201-K-FRAME
Gas Chamber for stages with k-frame opening (160×110 mm)
- Comes with Sliding Lid
- Features up to 12 holes for inlet and outlet of perfusion tubings
- It requires at least one specimen holder
The set consists of:
H201-KF-KOEHLER
Gas Chamber for stages with k-frame opening (160×110 mm)
- Comes with Koehler Lid
- Features up to 12 holes for inlet and outlet of perfusion tubings
- It requires at least one specimen holder
GS35-M
- 1×3″ chamber slide and 35mm petri dishes holder
H201-MW-HOLDER
- Multiwell plates holder
In progress