Transparent Cage Incubator DMi8
158206046
158206046 - Transparent Cage Incubator DMi8
Transparent microscope incubator for DMi8 with STELLARIS to control the temperature in a large volume around the microscope.
The set consists of:
The set consists of:
H201-ENCLOSURE-DMi8-158
- Compatible with all STELLARIS configurations – download compatibility chart
- Sliding doors on front and side panels
- Removable front panel
- Seals and sealed openings allow tubes and cables to be inserted inside the housing
- Dual air inlets and outlets and constant air circulation ensure stable operation of the system and excellent temperature distribution throughout the housing
- Built in dimmable LED light
H201-T-UNIT-BL
Temperature Unit that generates warm air to raise the temperature inside the enclosure.
- Temperature range: from 3°C above ambient to 42°C
- Temperature accuracy: 0.1°C
- Sample or enclosure feedback operation
- # 3 Temperature sensors: in the enclosure; in the gas chamber; inside the air heater
- # 1 Flow rate sensor inside the air heater
OKO-TOUCH
User-friendly 4.3” touch screen interface of Okolab Controllers.
- Turn Controllers on/off
- Define set point values
- Select sample or enclosure feedback mode
- Set flow rates of gas controllers
- Display all set points and measured parameters
- Run self calibration procedures
Choose the gas controller
Digital CO2 Controller with Air Pump and Vibration Free Humidifier.
The set consists of:
The set consists of:
CO2-UNIT-BL
- Range: CO2 0-18%
- Accuracy: CO2 ± 0.1%
- Repeatability better than 0.1%
- Sensor type: CO2: NDIR – 10 year-life
- Output flow rate: 0.0 – 1.0 L/min. Outlet Pressure: ambient
- Combine with HM-ACTIVE of HM-VF for output gas humidity control
HM-VF
- Vibration free humidifier
- Fits inside the enclosure
- Humidification occurs without bubbling through a semi-permeable membrane
- Re-filler without opening the enclosure and without perturbing the sample
OKO-AIR-PUMP-BL
- Plug and play solution for air inlet
- Compatible with Bold Line Digital Gas Controllers
- Convenient alternative to 100% air tanks/compressed air sources
- Air flow rate: 0.4 l /min
Digital CO2 / O2 Controller for Hypoxia with Air Pump and Vibration Free Humidifier.
The set consists of:
The set consists of:
CO2-O2-UNIT-BL [0-10;1-18]
- Range: CO2 0-10%; O2 1-18% (or Air)
- Accuracy: CO2± 0.1% @ 5.0%; O2 ± 0.1% @ 5.0%
- Repeatability: CO2 better than 0.1%; O2 better than 0.1%
- Sensor type: CO2: NDIR – 10 year-life; O2: Optical – 5 years lifetime
- Output flow rate: 0.0 – 1.0 L/min. Outlet Pressure: ambient
- Combine with HM-ACTIVE of HM-VF for output gas humidity control
HM-VF
- Vibration free humidifier
- Fits inside the enclosure
- Humidification occurs without bubbling through a semi-permeable membrane
- Re-filler without opening the enclosure and without perturbing the sample
OKO-AIR-PUMP-BL
- Plug and play solution for air inlet
- Compatible with Bold Line Digital Gas Controllers
- Convenient alternative to 100% air tanks/compressed air sources
- Air flow rate: 0.4 l /min
Digital CO2 / O2 Controller for Hypoxia and Hyperoxia with Vibration Free Humidifier.
The set consists of:
The set consists of:
CO2-O2 Unit-BL [0-20;1-95]
- Range: CO2 0-20%; O2 1-95%
- Accuracy at 5% CO2 and 5% O2: CO2 ± 0.2%; O2 ± 0.3%
- Blending mechanism: Digital Flow Meters with CMOS Sensors
- Output flow rate: 0.2, 0.3 or 0.4 Nl/min, depending on Oxygen set point. Outlet Pressure: ambient
- Combine with HM-ACTIVE of HM-VF for output gas humidity control
HM-VF
- Vibration free humidifier
- Fits inside the enclosure
- Humidification occurs without bubbling through a semi-permeable membrane
- Re-filler without opening the enclosure and without perturbing the sample
Choose the gas chamber
For use with DMi8 with stage opening of 110 x 160 mm without Super Z in combination with any Cage Incubator type.
The set consists of:
The set consists of:
H201-KF-KOEHLER
Gas Chamber for stages with k-frame opening (160×110 mm)
- Comes with Koehler Lid
- Features up to 12 holes for inlet and outlet of perfusion tubings
- It requires at least one specimen holder
GS35-M
- 1×3″ chamber slide and 35mm petri dishes holder
H201-MW-HOLDER
- Multiwell plates holder
H201-MEC-LG-GS35
H201-MEC-LG-GS35
For use with DMi8 with Super Z Stage in combination with any Cage Incubator type.
The set consists of:
The set consists of:
H201-LG
- Gas Chamber for Leica Inverted Super-Z
- Total weight on stage: 100 g with standard inserts
- Total weight on stage: 120 g with Multiwell insert
- Perfusion holes: 12 holes for 2.5mm O.D. tubings available for perfusion
- It requires at least one specimen holder
H201-MEC-LG-GS35
- 2x 1×3″ chamber slides and 2x35mm petri dish holder
GS35-WSB-M
GS35-WSB-M
For use with DMi8 with Z-Piezo table in combination with any Cage Incubator type.
The set consists of:
The set consists of:
H201-KF-WSB
Gas chamber for for Z-Piezo
- Total weight on Z-piezo: 130 g
- Features 6 perfusion openings (diameter 2.5)
- It requires at least one specimen holder
GS35-WSB-M
- 1×3” chamber slide and 35mm petri dish holder
For use with TCS SP8DLS objective holder in combination with any Cage Incubator type.
Compatible with Digitalightsheet (DLS) module.
The set consists of:
Compatible with Digitalightsheet (DLS) module.
The set consists of:
H201-LG-DLS
Gas Chamber for stages for TCS SP8DLS objective holder
- Compatible with Digitalightsheet (DLS) module. It allows usage of illumination and detection lenses
- Includes objective collars for detection lenses HC PL FLUOTAR 5x/0.15 IMM DLS, HC APO L 10x/0.3 W and Leica HC FLUOTAR L 25x/0.95 W
- Features 4 perfusion openings (diameter 2.0)
- Recommended Humidity Module: HM-ACTIVE
1×35-DLS
- 35mm petri dish holder
1×60-DLS
- 60mm petri dish holder
In progress