T/H/CO2 UNO+ controller w k-frame chamber
158206101
158206101 - T/H/CO2 UNO+ controller w k-frame chamber
UNO-PLUS T/H/CO2 set for use on k-frame XY stages.
It includes:
- All-in-one T/H/CO2 UNO-PLUS controller with embedded 7.3" touch screen display, for use with both 100% CO2 or premixed Air+5%CO2. Compatible with Okolab Objective Heaters and UNO-PLUS incubating chambers.
Technical Specs
The thermal controller allows to work both in chamber and in specimen feedback mode. T range: 3°C above ambient - 60°C. Temperature accuracy is ± 0.1°C in specimen feedback mode and ± 0.3°C in chamber feedback mode, if room temperature remains within ± 1°C. The controller is compatible with OBJ-COLLAR series - recommended for immersion objectives. Collars connect directly to the controller and are calibrated with automatic routines.
Open-loop digital CO2 mixer with 0.1% Resolution and ± 0.2% Accuracy. CO2 range 0-20%. An internal air pump allows to use background air to create Air/CO2 mixtures. A separate tubing kit is also included in case a premixed gas source is used instead of pure CO₂.
Open-loop digital Humidity module. Humidity range at 37°C: 51 to 90%. Humidity Set-point Resolution: 1%. It features a temperature controlled tube to deliver the humidified gas to the incubating chamber.
- UNO-PLUS Electrically heated chamber for XY stages with k-frame insert (160x110mm) - sliding lid.
The chamber is uniformly heated by means of embedded electric resistances and is covered with a temperature controlled conductive glass lid. It hosts MW plates without addition of any insert. Inserts are available to host Petri, Chambered Slides, Glass Slides, etc.
It hosts MW plates without addition of any insert. Inserts are available to host Petri, Chambered Slides, Glass Slides, etc.
Inserts can be used on XY/Piezo stages even without gas chamber, provided that the XY/piezo stage is equipped with a MW holder, such as K-FRAME-MW-HOLDER.
Perfusion holes: #6, 2.5 mm O.D.
Minimum condenser working distance: 23 mm
- #1 35mm Petri-dish holder - it can also fit into any XY/piezo stage equipped with a holder for multiwell plates
- #1 1”x3” chamber slide holder - it can also fit into any XY/piezo stage equipped with a holder for multiwell plates
It includes:
- All-in-one T/H/CO2 UNO-PLUS controller with embedded 7.3" touch screen display, for use with both 100% CO2 or premixed Air+5%CO2. Compatible with Okolab Objective Heaters and UNO-PLUS incubating chambers.
Technical Specs
The thermal controller allows to work both in chamber and in specimen feedback mode. T range: 3°C above ambient - 60°C. Temperature accuracy is ± 0.1°C in specimen feedback mode and ± 0.3°C in chamber feedback mode, if room temperature remains within ± 1°C. The controller is compatible with OBJ-COLLAR series - recommended for immersion objectives. Collars connect directly to the controller and are calibrated with automatic routines.
Open-loop digital CO2 mixer with 0.1% Resolution and ± 0.2% Accuracy. CO2 range 0-20%. An internal air pump allows to use background air to create Air/CO2 mixtures. A separate tubing kit is also included in case a premixed gas source is used instead of pure CO₂.
Open-loop digital Humidity module. Humidity range at 37°C: 51 to 90%. Humidity Set-point Resolution: 1%. It features a temperature controlled tube to deliver the humidified gas to the incubating chamber.
- UNO-PLUS Electrically heated chamber for XY stages with k-frame insert (160x110mm) - sliding lid.
The chamber is uniformly heated by means of embedded electric resistances and is covered with a temperature controlled conductive glass lid. It hosts MW plates without addition of any insert. Inserts are available to host Petri, Chambered Slides, Glass Slides, etc.
It hosts MW plates without addition of any insert. Inserts are available to host Petri, Chambered Slides, Glass Slides, etc.
Inserts can be used on XY/Piezo stages even without gas chamber, provided that the XY/piezo stage is equipped with a MW holder, such as K-FRAME-MW-HOLDER.
Perfusion holes: #6, 2.5 mm O.D.
Minimum condenser working distance: 23 mm
- #1 35mm Petri-dish holder - it can also fit into any XY/piezo stage equipped with a holder for multiwell plates
- #1 1”x3” chamber slide holder - it can also fit into any XY/piezo stage equipped with a holder for multiwell plates
UNO-PLUS-T-H-CO2
All-in-one T/H/CO2 UNO-PLUS controller with embedded 7.3″ touch screen display, for use with both 100% CO2 or premixed Air+5%CO2. Compatible with Okolab Objective Heaters and UNO-PLUS incubating chambers.
UNO-K-FRAME
– UNO-PLUS Electrically heated chamber for XY stages with k-frame insert (160x110mm) – sliding lid.
1×35-INSERT
- 35mm petri dish holder
- it can also fit into any XY/piezo stage equipped with a holder for multiwell plates
1xGS-INSERT:
- 1”x3” chamber slide holder
- it can also fit into any XY/piezo stage equipped with a holder for multiwell plates
