Black Cage Incubator DMi8

158206048

158206048 - Black Cage Incubator DMi8

Black microscope incubator for DMi8 with STELLARIS to control the temperature in a large volume around the microscope.

The set consists of:

H201-ENCLOSURE-DMi8-BLACK-158



  • Compatible with all STELLARIS configurations – download compatibility chart

  • Dark environment for light sensitive samples

  • Sliding doors on front and side panels

  • Removable front panel

  • Dual air inlets and outlets and constant air circulation ensure stable operation of the system and excellent temperature distribution throughout the housing

  • Built in dimmable LED light


H201-T-UNIT-BL


Temperature Unit that generates warm air to raise the temperature inside the enclosure.



  • Temperature range: from 3°C above ambient to 42°C

  • Temperature accuracy: 0.1°C

  • Sample or enclosure feedback operation

  • # 3 Temperature sensors: in the enclosure; in the gas chamber; inside the air heater

  • # 1 Flow rate sensor inside the air heater


OKO-TOUCH


User-friendly 4.3” touch screen interface of Okolab Controllers.



  • Turn Controllers on/off

  • Define set point values

  • Select sample or enclosure feedback mode

  • Set flow rates of gas controllers

  • Display all set points and measured parameters

  • Run self calibration procedures


Choose the gas controller

Digital CO2 Controller with Air Pump and Vibration Free Humidifier.

The set consists of:

CO2-UNIT-BL



  • Range: CO2 0-18%

  • Accuracy: CO2 ± 0.1%

  • Repeatability better than 0.1%

  • Sensor type: CO2:  NDIR – 10 year-life

  • Output flow rate: 0.0 – 1.0 L/min. Outlet Pressure: ambient

  • Combine with HM-ACTIVE of HM-VF for output gas humidity control


HM-VF



  • Vibration free humidifier

  • Fits inside the enclosure

  • Humidification occurs without bubbling through a semi-permeable membrane

  • Re-filler without opening the enclosure and without perturbing the sample


OKO-AIR-PUMP-BL



  • Plug and play solution for air inlet

  • Compatible with Bold Line Digital Gas Controllers

  • Convenient alternative to 100% air tanks/compressed air sources

  • Air flow rate: 0.4 l /min


Digital CO2 / O2 Controller for Hypoxia with Air Pump and Vibration Free Humidifier.

The set consists of:

CO2-O2-UNIT-BL [0-10;1-18]



  • Range: CO2 0-10%; O2 1-18% (or Air)

  • Accuracy: CO2± 0.1% @ 5.0%; O2 ± 0.1% @ 5.0%

  • Repeatability: CO2 better than 0.1%; O2 better than 0.1%

  • Sensor type: CO2:  NDIR – 10 year-life; O2: Optical – 5 years lifetime

  • Output flow rate: 0.0 – 1.0 L/min. Outlet Pressure: ambient

  • Combine with HM-ACTIVE of HM-VF for output gas humidity control


HM-VF



  • Vibration free humidifier

  • Fits inside the enclosure

  • Humidification occurs without bubbling through a semi-permeable membrane

  • Re-filler without opening the enclosure and without perturbing the sample


OKO-AIR-PUMP-BL



  • Plug and play solution for air inlet

  • Compatible with Bold Line Digital Gas Controllers

  • Convenient alternative to 100% air tanks/compressed air sources

  • Air flow rate: 0.4 l /min


Digital CO2 / O2 Controller for Hypoxia and Hyperoxia with Vibration Free Humidifier.

The set consists of:

CO2-O2 Unit-BL [0-20;1-95]



  • Range: CO2 0-20%; O2 1-95%

  • Accuracy at 5% CO2 and 5% O2: CO2 ± 0.2%; O2 ± 0.3%

  • Blending mechanism: Digital Flow Meters with CMOS Sensors

  • Output flow rate: 0.2, 0.3 or 0.4 Nl/min, depending on Oxygen set point. Outlet Pressure: ambient

  • Combine with HM-ACTIVE of HM-VF for output gas humidity control


HM-VF



  • Vibration free humidifier

  • Fits inside the enclosure

  • Humidification occurs without bubbling through a semi-permeable membrane

  • Re-filler without opening the enclosure and without perturbing the sample


Choose the gas chamber

GS35-M
H201-MW-HOLDER
GS35-M
H201-MW-HOLDER
For use with DMi8 with stage opening of 110 x 160 mm without Super Z in combination with any Cage Incubator type.

The set consists of:

H201-KF-KOEHLER


Gas Chamber for stages with k-frame opening (160×110 mm)



  • Comes with Koehler Lid

  • Features up to 12 holes for inlet and outlet of perfusion tubings

  • It requires at least one specimen holder


GS35-M



  • 1×3″ chamber slide and 35mm petri dishes holder


H201-MW-HOLDER



  • Multiwell plates holder


H201-MEC-LG-GS35
H201-MEC-LG-GS35
For use with DMi8 with Super Z Stage in combination with any Cage Incubator type.

The set consists of:

H201-LG



  • Gas Chamber for Leica Inverted Super-Z

  • Total weight on stage: 100 g with standard inserts

  • Total weight on stage: 120 g with Multiwell insert

  • Perfusion holes: 12 holes for 2.5mm O.D. tubings available for perfusion

  • It requires at least one specimen holder


H201-MEC-LG-GS35



  • 2x 1×3″ chamber slides and 2x35mm petri dish holder


GS35-WSB-M
GS35-WSB-M
For use with DMi8 with Z-Piezo table in combination with any Cage Incubator type.

The set consists of:

H201-KF-WSB


Gas chamber for for Z-Piezo



  • Total weight on Z-piezo: 130 g

  • Features 6 perfusion openings (diameter 2.5)

  • It requires at least one specimen holder


GS35-WSB-M



  • 1×3” chamber slide and 35mm petri dish holder


1x35-DLS
1x60-DLS
1x35-DLS
1x60-DLS
DLS requires active humidity control. Must be combined with one of the following gas controllers: 158006094 158006095 158006096
For use with TCS SP8DLS objective holder in combination with any Cage Incubator type.

Compatible with Digitalightsheet (DLS) module.

The set consists of:

H201-LG-DLS


Gas Chamber for stages for TCS SP8DLS objective holder



  • Compatible with Digitalightsheet (DLS) module. It allows usage of illumination and detection lenses

  • Includes objective collars for detection lenses HC PL FLUOTAR 5x/0.15 IMM DLS, HC APO L 10x/0.3 W and Leica HC FLUOTAR L 25x/0.95 W

  • Features 4 perfusion openings (diameter 2.0)

  • Recommended Humidity Module: HM-ACTIVE


1×35-DLS



  • 35mm petri dish holder


1×60-DLS



  • 60mm petri dish holder


ACCESSORIES

SM-BL



  • Smart Box – Data logger, web server, remote operation via Internet, Tablet or SmartPhone


Configuration Summary
In progress