MICA-CO2-INCUBATOR

MICA-CO2-O2-INCUBATOR-VALVE-KIT

• It Replaces standard incubator, can be used with and without oxygen control


• Included in MICA-O2-UPGRADE kit


• Temperature range: from room temperature +3°C to 45°C – accuracy ± 0.1°C


• CO2 range: 0 to 10 % – accuracy of ± 0.1%


• O2 range: 1% to air – accuracy of ± 0.1%


• Gas is humidified by means of a water vapor semi-permeable tube immersed in a water bath

MICA-CO2-O2-GAS-CHAMBER

• Gas chamber for MICA


• MICA-CO2-O2-GAS-CHAMBER hosts multiwell plates


• Sample holders are available for Petri and chamber slides


• The chamber features a removable riser. The riser is required when using multiwell plates. It can be removed when using Petri or chamber slides to obtain a slim profile


• Perfusion: the chamber features 24 holes for 2.5mm O.D. tubings ( 12 holes in the chamber riser and 12 holes in the chamber base)


• Sliding lid for easy pipetting

MICA-CO2-O2-INCUBATOR-HM

• Vibration-free humidifier placed inside MICA sample volume.


• It is necessary only in combination with MICA-CO2-O2-GAS-CHAMBER.


• Water reservoir with a submerged semi-permeable tube to humidify gas before entering the MICA-CO2-O2-GAS-CHAMBER


• Equipped with optical sensor level to detect when the maximum water level is reached

OKO-AP

• Plug and play solution for air inlet


• Compatible with UNO line


• Convenient alternative to 100% air tanks/compressed air sources


• Air flow rate: 0.4 l /min

MICA-MW-FULL-COVERAGE-HOLDER

• Fits in 110x160mm openings (K-Frame opening) and hosts any multiwell plate


• It is necessary in combination with MICA-CO2-INCUBATOR


• It is NOT compatible with MICA-CO2-O2-GAS-CHAMBER, which is included in MICA-O2-UPGRADE


• All other sample holders fit both into MICA-MW-FULL-COVERAGE-HOLDER and into MICA-CO2-O2-GAS-CHAMBER