Laser Safety Box DMi8 and 4TUNE

H201-T-UNIT-BL

Temperature Unit that generates warm air to raise the temperature inside the enclosure.

• Temperature range: from 3°C above ambient to 42°C


• Temperature accuracy: 0.1°C


• Sample or enclosure feedback operation


• # 3 Temperature sensors: in the enclosure; in the gas chamber; inside the air heater


• # 1 Flow rate sensor inside the air heater

OKO-TOUCH

User-friendly 4.3” touch screen interface of Okolab Controllers.

• Turn Controllers on/off


• Define set point values


• Select sample or enclosure feedback mode


• Set flow rates of gas controllers


• Display all set points and measured parameters


• Run self calibration procedures

CO2-UNIT-BL

• Range: CO2 0-18%


• Accuracy: CO2 ± 0.1%


• Repeatability better than 0.1%


• Sensor type: CO2:  NDIR – 10 year-life


• Output flow rate: 0.0 – 1.0 L/min. Outlet Pressure: ambient


• Combine with HM-ACTIVE of HM-VF for output gas humidity control

HM-VF

• Vibration free humidifier


• Fits inside the enclosure


• Humidification occurs without bubbling through a semi-permeable membrane


• Re-filler without opening the enclosure and without perturbing the sample

OKO-AIR-PUMP-BL

• Plug and play solution for air inlet


• Compatible with Bold Line Digital Gas Controllers


• Convenient alternative to 100% air tanks/compressed air sources


• Air flow rate: 0.4 l /min

CO2-O2-UNIT-BL [0-10;1-18]

• Range: CO2 0-10%; O2 1-18% (or Air)


• Accuracy: CO2± 0.1% @ 5.0%; O2 ± 0.1% @ 5.0%


• Repeatability: CO2 better than 0.1%; O2 better than 0.1%


• Sensor type: CO2:  NDIR – 10 year-life; O2: Optical – 5 years lifetime


• Output flow rate: 0.0 – 1.0 L/min. Outlet Pressure: ambient


• Combine with HM-ACTIVE of HM-VF for output gas humidity control

HM-VF

• Vibration free humidifier


• Fits inside the enclosure


• Humidification occurs without bubbling through a semi-permeable membrane


• Re-filler without opening the enclosure and without perturbing the sample

OKO-AIR-PUMP-BL

• Plug and play solution for air inlet


• Compatible with Bold Line Digital Gas Controllers


• Convenient alternative to 100% air tanks/compressed air sources


• Air flow rate: 0.4 l /min

CO2-O2 Unit-BL [0-20;1-95]

• Range: CO2 0-20%; O2 1-95%


• Accuracy at 5% CO2 and 5% O2: CO2 ± 0.2%; O2 ± 0.3%


• Blending mechanism: Digital Flow Meters with CMOS Sensors


• Output flow rate: 0.2, 0.3 or 0.4 Nl/min, depending on Oxygen set point. Outlet Pressure: ambient


• Combine with HM-ACTIVE of HM-VF for output gas humidity control

HM-VF

• Vibration free humidifier


• Fits inside the enclosure


• Humidification occurs without bubbling through a semi-permeable membrane


• Re-filler without opening the enclosure and without perturbing the sample

H201-KF-KOEHLER

Gas Chamber for stages with k-frame opening (160×110 mm)

• Comes with Koehler Lid


• Features up to 12 holes for inlet and outlet of perfusion tubings


• It requires at least one specimen holder

GS35-M

• 1×3″ chamber slide and 35mm petri dishes holder

H201-MW-HOLDER

• Multiwell plates holder

H201-LG

• Gas Chamber for Leica Inverted Super-Z


• Total weight on stage: 100 g with standard inserts


• Total weight on stage: 120 g with Multiwell insert


• Perfusion holes: 12 holes for 2.5mm O.D. tubings available for perfusion


• It requires at least one specimen holder

H201-MEC-LG-GS35

• 2x 1×3″ chamber slides and 2x35mm petri dish holder

H201-KF-WSB

Gas chamber for for Z-Piezo

• Total weight on Z-piezo: 130 g


• Features 6 perfusion openings (diameter 2.5)


• It requires at least one specimen holder

GS35-WSB-M

• 1×3” chamber slide and 35mm petri dish holder

SM-BL

• Smart Box – Data logger, web server, remote operation via Internet, Tablet or SmartPhone